Serving the Madison area  ·  (608) 292-2031  ·  Open Mon-Sun 7am-7pm
📞 (608) 292-2031 Free Quote

Metal Roofing in Middleton, WI (53562) · Local Professionals

Madison Metal Roofing · Fast response in Middleton and the Madison area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Middleton, Wisconsin, is a city where 1990s to 2020s two-story homes sit on generous lots near Lake Mendota, and the winters are long, cold, and heavy on snow. If you live off University Avenue or near Pheasant Branch Conservancy, you know how fast ice dams can form at the eaves and how much snow can slide off a metal roof all at once.

Homeowners in the 53562 ZIP code call Madison Metal Roofing because we understand Middleton's specific challenges: snow-shedding standing seam for lake-effect snow loads, DSPS-certified installation, and fully insured crews (general liability and workers' compensation). Since 2009, we have been the local team that shows up when a storm peels back a panel or a fastener fails.

Metal Roofing in Middleton (53562)

Middleton's terrain and housing stock vary from the flat, tight lots near the Pheasant Branch Creek to the gently rolling grades west of Highway 12. Many homes here are two-story builds from the last 30 years, often with complex rooflines and skylights that demand precise flashing. The heavy snow loads and freeze-thaw cycles mean ice dams are a real threat, especially on north-facing slopes and low-pitch porch roofs. We install standing seam with snow guards and ice protection to manage that slide, and we use fastening systems that handle the thermal movement of metal in Wisconsin's temperature swings.

Our team has served Middleton and the surrounding Madison area since 2009, and we are a Metal Roofing Alliance member. We know the local building department's inspection timing and the HOA design review that some Middleton neighborhoods require for panel profile and color.

Our services in Middleton

How a Job Works in Middleton

Step 1: You call (608) 292-2031 or request a free estimate online. We schedule an on-site assessment at your Middleton property, usually within a few days. We inspect your existing roof, check the decking and flashing, and talk through options like standing seam, corrugated panels, or a retrofit over shingles. You get a written estimate with clear pricing.

Step 2: Once you approve, we pull the required permits through the City of Middleton (rules vary, so we verify with the local building department) and coordinate any HOA approvals. Our crews are DSPS-certified and fully insured. We protect your landscaping and use lifts or staging suited to tight lots near the lake or narrow driveways off Allen Boulevard.

Step 3: After installation, we do a full cleanup, magnet sweep for nails, and a final walkthrough with you. We leave your property clean and show you how the new roof and snow guards work.

Pricing in Middleton depends on roof size, pitch, access, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. A retrofit over shingles starts at $7 per square foot, while corrugated panel roofing starts at $5.50 per square foot. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Snow guards and ice protection start at $1,200. For a free estimate on your Middleton home, call (608) 292-2031.

✅ Metal Roofing Alliance Member, licensed and insured for work in Middleton and nearby areas.

My home near Pheasant Branch Conservancy has heavy tree cover and I get ice dams every winter. Will a metal roof help?
Yes. Metal roofs shed snow more readily than shingles, especially with standing seam and snow guards. We also install ice protection at the eaves and proper underlayment to manage meltwater. Tree cover can drop debris that traps snow, so we often recommend gutter guards and regular inspections.
A storm just peeled back some panels on my roof in Middleton. How fast can you respond?
We prioritize storm and wind damage calls in Middleton and the Madison area. Call (608) 292-2031 and we will schedule an inspection, usually within 24 to 48 hours depending on demand. We can tarp or secure the area if needed and provide a written repair estimate.
What does a typical metal roof replacement cost for a two-story home in Middleton?
For a 2,000 to 2,500 square foot roof, most replacements fall between $9 and $12 per square foot installed, depending on panel type, pitch, and access. That means roughly $18,000 to $30,000. We provide a detailed free estimate after inspecting your roof.
Do I need a permit from the City of Middleton for a metal roof replacement?
Yes, roofing permits are commonly required for a full replacement or re-roof, and thresholds vary. We handle the permit application and inspections, and we always verify current rules with the City of Middleton. You can also check the City of Middleton website for general information.
My HOA requires approval for roof color. Can you help with that process?
We can provide product samples, color chips, and manufacturer specs for your HOA design review. Some Middleton neighborhoods have specific requirements for panel profile and color, so we recommend starting early. We are happy to coordinate with your HOA board.
Are you fully insured for work on my Middleton property?
Yes. We carry general liability and workers' compensation insurance for all crews. We can provide a certificate of insurance before work begins, so you are protected if anything goes wrong on your property.
What maintenance does a metal roof need in Middleton's climate?
Check fasteners and seals annually, especially after winter. Clear debris from gutters and valleys, and inspect snow guards before the first snow. We offer free inspections and can replace screws or re-fasten panels starting at $750. Call (608) 292-2031 to schedule.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Madison

All your work handled by qualified professionals in Madison

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Madison

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Madison · Response within 24h · No commitment · ☎ (608) 292-2031

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Madison ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm