Serving the Madison area  ·  (608) 292-2031  ·  Open Mon-Sun 7am-7pm
📞 (608) 292-2031 Free Quote

Metal Roofing in Mount Horeb, WI (53572) · Local Professionals

Madison Metal Roofing · Fast response in Mount Horeb and the Madison area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Mount Horeb sits in the Driftless hills just west of Madison, where red dairy barns and older farmhouses share the landscape with newer homes off Main Street and near the Military Ridge Trail. The wind that rolls over those ridges finds every loose fastener and lifted panel, and the freeze-thaw cycles here work on flashing and seams year after year.

Homeowners in Mount Horeb (53572) call Madison Metal Roofing because we understand both sides of this town: the agricultural buildings that need tough, weather-tight panels and the residential roofs that have to look right and shed snow and ice without drama. We have been at it since 2009, and we are a Metal Roofing Alliance member.

Metal Roofing in Mount Horeb (53572)

Mount Horeb is a village of contrasts. You have working farms and machine sheds out on the rolling ground, older homes closer to the downtown and the Stewart Park area, and newer subdivisions where lot sizes are tighter and grades can be tricky. The Driftless terrain means drainage matters: water moves fast on slopes, and a roof that is not detailed correctly at valleys and eaves will show it. Snow and ice are the big drivers here, with heavy winter loads and ice damming at the eaves on homes that sit higher up. Summer storms bring hail and straight-line wind that can peel back panels or loosen fasteners, and that is when we get the most calls. We handle corrugated and ribbed panel roofing for barns and commercial buildings, standing seam and metal shingle systems for homes, and the repairs that keep an older roof going.

Our team has been serving Mount Horeb and the Madison area since 2009, and we are fully insured with general liability and workers' compensation.

Our services in Mount Horeb

How a Job Works in Mount Horeb

Step 1: you call (608) 292-2031 or request a free estimate online. We schedule a time to walk the roof and the property, look at the deck and flashing, and talk through what you are seeing. You get a written scope and a clear price before anything starts.

Step 2: we handle the work itself, including the details that matter here. On tighter village lots we plan material staging and dumpster placement so we are not blocking neighbors or the alley. If your project touches a historic district or an HOA, we coordinate the paperwork and product submittals early so the schedule does not stall. We pull the required roofing permits through the local building department and keep inspections on track.

Step 3: cleanup and a final walkthrough. We magnet-sweep for nails, haul away old material, and go over the finished roof with you so you know what was done and what to watch for. We leave your property clean.

Pricing in Mount Horeb depends on the roof, not just the square footage. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a retrofit over existing shingles around $7. Corrugated and ribbed panel roofing starts around $5.50 per square foot, metal shingle and stone-coated steel around $9, and copper or specialty metal around $20. Repairs and leak calls start around $450, screw replacement and re-fastening around $750, flashing and chimney or skylight repair around $600, and snow guards around $1,200. Coating and painting starts around $2.50 per square foot, and gutters for metal roofs run from about $9 per linear foot. The main cost factors are roof size and pitch, access and staging, the condition of the deck and flashing, and how urgent the job is. Call (608) 292-2031 for a free estimate.

✅ Metal Roofing Alliance Member, licensed and insured for work in Mount Horeb and nearby areas.

Do metal roofs hold up to the snow and ice we get on the higher ground around Mount Horeb?
Yes, when they are installed for this climate. We specify panels and fasteners for heavy snow loads, detail the eaves and valleys to manage ice damming, and often add snow guards above walkways and doors so snow releases in a controlled way instead of sliding off in a sheet. Homes that sit up on the ridges west of the village see more wind and drifting, so we pay close attention to fastening patterns and edge metal.
How fast can you respond to storm damage or an active leak in Mount Horeb?
We prioritize active leaks and storm damage. Call (608) 292-2031 and we will get a crew out to inspect and make the roof watertight as soon as we can, often the same day or next. We document what we find with photos, which helps if you are filing an insurance claim. We never promise coverage or suggest a deductible can be waived; that is between you and your insurer.
What does a typical metal roof repair cost in Mount Horeb?
Most repair and leak calls start around $450, and screw replacement or re-fastening starts around $750. Flashing, chimney, and skylight repairs start around $600. The final price depends on access, how many problem areas there are, and whether the issue is a simple fastener or a larger flashing detail. We give you a written price before work begins.
Do I need a permit for a metal roof in Mount Horeb, and where do I check the rules?
Roofing permits are commonly required for a full replacement or re-roof, and the thresholds and inspection requirements vary by jurisdiction. We pull the permits for our projects and coordinate inspections. For the specific rules that apply to your address, check with the local building department, and you can start at the City of Mount Horeb website at https://danecounty.gov for official information.
What if my Mount Horeb property is in an HOA or near a property line?
HOAs and historic design review can restrict panel profile and color, so we help you choose a product that meets the rules and submit the paperwork early. On property lines, we keep staging and roof drainage on your side and follow setback and drainage rules. If a neighbor's tree or runoff is part of the problem, we will tell you what we see and what is yours to fix versus theirs.
Are you insured for work on my Mount Horeb home or farm building?
Yes. We are fully insured with general liability and workers' compensation. We can provide a certificate of insurance before work starts, which matters for both residential and agricultural projects.
What maintenance should I do on a metal roof in Mount Horeb before winter?
Late summer and early fall are the right time to check fasteners, sealant at flashing and penetrations, and gutter flow before snow and ice arrive. Clear leaves from valleys and gutters, look for lifted panels or backed-out screws after summer storms, and have snow guards checked if you have them. A free inspection now is cheaper than an ice dam repair in January.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Madison

All your work handled by qualified professionals in Madison

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Madison

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Madison · Response within 24h · No commitment · ☎ (608) 292-2031

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Madison ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm