Serving the Madison area  ·  (608) 292-2031  ·  Open Mon-Sun 7am-7pm
📞 (608) 292-2031 Free Quote

Metal Roofing in Sun Prairie, WI (53590) · Local Professionals

Madison Metal Roofing · Fast response in Sun Prairie and the Madison area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Sun Prairie is booming, and you can see it in the rooftops: new two-story homes off Grand Avenue and Highway 19, older ranches near the historic downtown, and farmhouses out toward Token Creek. The common thread is winter. Ice dams form at the eaves here every year, and once meltwater backs up under the shingles, it finds the drywall.

That is why homeowners in 53590 call Madison Metal Roofing. We have been installing, repairing, and replacing metal roofs across Dane County since 2009, and we know how Sun Prairie's fast-growing neighborhoods and open farmland handle snow, hail, and the freeze-thaw cycles that come through every March.

Metal Roofing in Sun Prairie (53590)

Sun Prairie sits on gently rolling ground with a mix of tight new subdivisions and wide-open lots, and that changes how a metal roof goes on. In the newer neighborhoods off Grand Avenue and Windsor Street, lots are narrow and driveways are short, so staging panels and a boom truck takes planning. On the older streets near downtown, we run into low-slope porch roofs and mature trees that drop limbs on panels during summer storms. And on the farm properties east of town, wind comes across open fields and works on fasteners and seams. Ice dams are the big one, though. The combination of heavy snow and deep frost means water sits at the eaves, and a metal roof with proper snow guards and ice protection handles that far better than shingles. We are a Metal Roofing Alliance member, fully insured with general liability and workers' compensation, and we have been serving Sun Prairie and the Madison area since 2009.

Our services in Sun Prairie

How a Job Works in Sun Prairie

Step 1: You call (608) 292-2031 or send a request, and we set up a free on-site assessment. We look at the roof, the attic, the eaves, and how water is moving, then give you a written estimate with options. No pressure, no vague numbers.

Step 2: Once you approve, we pull the permit through the local building department and schedule the crew. In Sun Prairie, that often means coordinating with an HOA on panel color and profile before we order material. On tight lots, we plan panel delivery and staging so we are not blocking your neighbor's driveway. Most residential roofs take a few days to a week depending on size and complexity.

Step 3: We clean up every day and do a final walkthrough with you. Magnets run over the lawn, gutters checked, and we make sure you know what was done and why. We leave your property clean.

Pricing in Sun Prairie depends on the size of the roof, the pitch, how many layers are coming off, and access. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, and metal roof over shingles (retrofit) around $7. A full replacement starts around $9 per square foot. Repairs and leak repairs start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight work at $600. Snow guards and ice protection start at $1,200, which is money well spent in this climate. We give free estimates, so call (608) 292-2031 and we will put real numbers on your roof.

✅ Metal Roofing Alliance Member, licensed and insured for work in Sun Prairie and nearby areas.

My house is in one of the newer Sun Prairie subdivisions off Grand Avenue, and the lot is tight. Can you still install a metal roof?
Yes. We deal with narrow lots and short driveways all the time in Sun Prairie's newer neighborhoods. We plan panel delivery and staging ahead of time, often using a boom truck that can reach over the house from the street or driveway. If a neighbor's driveway or a fence line is close, we coordinate access before the crew shows up so there are no surprises.
A storm just took off some panels on my Sun Prairie roof. How fast can you get out?
We treat wind and storm damage as a priority. Call (608) 292-2031 and we will schedule a free inspection, usually within a day or two depending on how many calls are coming in after a storm. We can tarp or secure the roof to stop water intrusion, then give you a repair estimate. We also document the damage for your insurance claim if you need it.
What does a typical metal roof cost in Sun Prairie, and what drives the price up or down?
Most Sun Prairie homeowners are looking at somewhere between $8 and $10 per square foot for installation, depending on the panel type. A simple ranch is on the lower end; a steep two-story with dormers and valleys is higher. Removing old shingles, adding snow guards, and repairing decking all add cost. We give free estimates so you get a number that fits your actual roof, not a generic range.
Do I need a permit for a metal roof in Sun Prairie, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof in Sun Prairie, and the rules vary by jurisdiction. We pull the permit for you and coordinate the inspection. For the specific requirements and fees that apply to your address, check with the City of Sun Prairie through the county site at https://danecounty.gov or call the building department directly. We will walk you through what is needed.
My HOA has rules about roof color. Can you help with approval, and what about the property line?
Yes. We regularly work with Sun Prairie HOAs on panel profile and color approvals, and we can provide product samples and specs for the board. On property lines, we keep all work and staging on your side and follow setback rules for gutters and snow guards. If a neighbor's tree is dropping limbs on your roof, that is a conversation between homeowners, but we can document the damage for you.
Are you fully insured for work at my Sun Prairie home?
Yes. We carry general liability insurance and workers' compensation coverage. That protects you if anything goes wrong on your property, and it means our crew is covered while they are on your roof. We are happy to provide a certificate of insurance before we start.
What should I do about ice dams on my Sun Prairie roof before next winter?
Ice dams form at the eaves here every winter because of heavy snow and deep frost. The best prevention is a metal roof with proper snow guards and ice protection, plus good attic insulation and ventilation. If you already have a metal roof, have us check the fasteners and snow guards in the fall. A free inspection now can save you a leak repair in January.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Madison

All your work handled by qualified professionals in Madison

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Madison

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Madison · Response within 24h · No commitment · ☎ (608) 292-2031

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Madison ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm