Serving the Madison area  ·  (608) 292-2031  ·  Open Mon-Sun 7am-7pm
📞 (608) 292-2031 Free Quote

Metal Roofing in Monona, WI (53716) · Local Professionals

Madison Metal Roofing · Fast response in Monona and the Madison area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Monona sits right on Lake Monona, and the housing stock tells the story: mid-century ranches and capes on quiet streets off Monona Drive, older cottages near the lake, and newer two-story homes tucked into the neighborhoods south of the Beltline. Lots are often tight, mature trees are everywhere, and the lake wind and winter ice hit roofs hard.

Homeowners in 53716 call us because we know what happens to shingle roofs here after 20 or 30 years of freeze-thaw, hail, and ice dams. We have been installing and repairing metal roofing around Madison since 2009, and we treat Monona jobs with the same straightforward approach: show up, assess honestly, and leave the property clean.

Metal Roofing in Monona (53716)

Monona properties come with their own set of challenges. Many homes near the lake have steep pitches and tight side yards, so staging materials and getting equipment in and out takes planning. The tree canopy is thick in older neighborhoods, which means gutters fill fast and shade keeps roofs damp longer after rain or snow. Down by the water, wind gusts come across the lake with nothing to stop them, and that is where you see lifted panels, missing fasteners, and flashing that has pulled away. Inland, closer to the Beltline and the commercial strips, hail and summer thunderstorms do the damage, and older shingle roofs often hit the point where repair no longer makes sense. We handle everything from standing seam and corrugated panel installations to stone-coated steel and copper, plus the gutters, snow guards, and flashing details that make a metal roof last in this climate. Our team is fully insured with general liability and workers' compensation, and we are a Metal Roofing Alliance member.

Our experience serving Monona and the Madison area, since 2009.

Our services in Monona

How a Job Works in Monona

Step 1: You call (608) 292-2031 or request a free estimate online. We schedule an on-site assessment, look at the roof, the attic if accessible, the gutters, and the flashing, and we give you a written scope with pricing. No pressure, no vague numbers.

Step 2: Once you approve, we pull the required permits through the local building department and schedule the work. In Monona, that often means coordinating with tight driveway access, mature trees that need protection, and neighbors who appreciate a heads-up. For HOA or historic review, we provide the panel profile and color details you need for approval before we order materials.

Step 3: When the job is done, we clean the site thoroughly, haul away old materials, and walk the roof and gutters with you. We do not leave until you have seen the finished work and know what to expect going forward.

Pricing in Monona depends on the size and pitch of your roof, access, the condition of the decking, and how soon you need the work done. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, and metal roof replacement around $9. If you are going over existing shingles with a retrofit, that starts around $7 per square foot, subject to local code limits on layers. Repairs and leak fixes start around $450, screw replacement and re-fastening around $750, and gutters for metal roofs around $9 per linear foot. Snow guards and ice protection start around $1,200, and flashing or chimney repair around $600. We give free estimates and free inspections, so call (608) 292-2031 and we will put together a real number for your property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Monona and nearby areas.

My Monona ranch has ice dams every winter along the north-facing eaves. Will a metal roof stop that?
A metal roof helps because snow slides off more readily than it does on shingles, but ice dams are really about attic heat and insulation. We assess ventilation and insulation during the estimate, and we often recommend snow guards and better eave detailing to keep ice from backing up. On many Monona homes, the fix is a combination of roof and attic work, not the roof alone.
A storm just peeled back panels on my roof near the lake. How fast can you get out to Monona?
We prioritize active leaks and storm damage. Call (608) 292-2031 and we will schedule a free inspection as quickly as possible, often the same day or next day for emergency situations. We can tarp or secure the area to prevent further water intrusion while we put together a repair plan and documentation for your insurance if needed.
What does a typical metal roof replacement cost for a mid-sized home in 53716?
For a typical 1,500 to 2,000 square foot roof, most Monona replacements fall in the range of $12,000 to $22,000 depending on the material and complexity. Standing seam and stone-coated steel sit at the higher end, corrugated panel at the lower end. Access, tree cover, decking repairs, and gutter work all affect the final number. We give a firm written estimate after seeing the roof.
Do I need a permit for a metal roof in Monona, and who handles it?
Roofing permits are commonly required for full replacements and re-roofs, and requirements can vary by jurisdiction. We handle the permit application and inspections as part of the job, and we always confirm current rules with the local building department. You can also check general city information at the City of Monona website (https://danecounty.gov).
My neighbor's tree hangs over my property line and drops limbs on my roof. What are my options?
Property line issues are civil matters, but we can help you document roof damage and recommend trimming that keeps branches off the roof surface. If you are in an HOA, review your architectural rules before changing panel profile or color, and we can provide product specs for the approval process. We do not remove trees, but we work around them safely.
Are you fully insured for work at my Monona home?
Yes. We carry general liability insurance and workers' compensation coverage for our crews. We are happy to provide a certificate of insurance before work begins so you have it for your records.
What maintenance does a metal roof need in Monona's climate?
Plan on a yearly inspection, especially after winter and after big summer storms. Check fasteners and washers for backing out, clear gutters and downspouts of leaves and grit, and look at flashing around chimneys and skylights. Snow guards are worth considering on steep pitches and over walkways. We offer free inspections and can set up a simple maintenance schedule.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Madison

All your work handled by qualified professionals in Madison

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Madison

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Madison · Response within 24h · No commitment · ☎ (608) 292-2031

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Madison ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm