Serving the Madison area  ·  (608) 292-2031  ·  Open Mon-Sun 7am-7pm
📞 (608) 292-2031 Free Quote

Metal Roofing in Oregon, WI (53575) · Local Professionals

Madison Metal Roofing · Fast response in Oregon and the Madison area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Oregon, Wisconsin, just south of Madison off Highway 14, is a mix of older village homes near the downtown historic district, mid-century ranches in established subdivisions, and newer two-story builds on the edges of town. The lots here tend to be generous, but the mature oaks and maples that shade them also drop limbs and fill gutters, and the long, cold winters with heavy snow and freeze-thaw cycles put roofs through a lot.

Homeowners in the 53575 ZIP code call Madison Metal Roofing because we have been working on Dane County roofs since 2009, and we understand what Oregon weather does to asphalt shingles, especially on the older homes that are now due for replacement. Whether you are near Jaycee Park or out toward the rolling farmland on the west side, we can help you decide if metal is the right move.

Metal Roofing in Oregon (53575)

Oregon sits on gently rolling ground with some steeper grades near the Sugar River and in the older parts of town, and that affects how we stage materials and handle water runoff. Many homes here have mature trees close to the roofline, which means debris buildup and the occasional fallen limb, so we pay close attention to flashing details and fastener placement. Older homes near the downtown historic district may have complex roof lines, multiple gables, and original features that need careful matching when we install metal. Newer subdivisions often have simpler roofs but tighter lot lines, so we plan deliveries and dumpster placement to keep neighbors happy. Ice damming at the eaves is a real issue on north-facing slopes, and we often recommend snow guards and proper underlayment to protect against it.

Our team has been serving Oregon and the surrounding Madison area since 2009, and we are a Metal Roofing Alliance member. We are fully insured with general liability and workers' compensation, and we handle everything from a small leak repair to a full replacement.

Our services in Oregon

How a Job Works in Oregon

Step 1: You call us at (608) 292-2031 or request a free estimate online. We schedule an on-site assessment at your Oregon property, where we inspect your current roof, check for leaks, examine flashing and fasteners, and discuss your options. We will give you a written estimate and answer any questions about materials, timelines, and permits.

Step 2: Once you approve the estimate, we pull the necessary permits from the local building department and schedule the work. In Oregon, permit timing can vary, so we handle that for you. On the job, our crew protects your landscaping, sets up safe access (which can be tricky on sloped lots or tight driveways), and installs your new metal roof according to manufacturer specifications. If your home is in a historic district or HOA, we can help coordinate any design review requirements.

Step 3: After installation, we do a thorough cleanup, including magnetic sweeps for nails, and walk the property with you to make sure you are satisfied. We leave your yard and driveway as clean as we found them.

Pricing for metal roofing in Oregon depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam from $10, and metal roof replacement from $9. If you are considering a retrofit over existing shingles, that starts at $7 per square foot, but keep in mind that local codes limit how many layers you can have. Repairs start at $450, and screw replacement or re-fastening starts at $750. We also offer free estimates for storm damage and inspections. Call us at (608) 292-2031 to get a precise quote for your Oregon home.

✅ Metal Roofing Alliance Member, licensed and insured for work in Oregon and nearby areas.

My house is near the downtown historic district in Oregon. Can I still get a metal roof?
Yes, but you may need to go through a design review if your property is in a historic district. We can help you choose a panel profile and color that meets local guidelines. We will also coordinate with the city on any required approvals.
A storm just knocked a limb onto my roof in Oregon. How fast can you respond?
We offer free inspections for storm damage and can usually get out to your Oregon property within a day or two, depending on demand. Call us at (608) 292-2031 to schedule an assessment and we will provide a written estimate for any needed repairs.
What does a typical metal roof replacement cost in Oregon?
Most full replacements in Oregon range from $9 to $14 per square foot installed, depending on the material and roof complexity. A standard ranch home might be on the lower end, while a steep or cut-up roof will be higher. We provide free estimates so you know exactly what to expect.
Do I need a permit for a metal roof in Oregon?
Yes, a building permit is typically required for a roof replacement or new installation. The rules and fees are set by the local building department, so we recommend checking with the City of Oregon website for current requirements. We can handle the permit application for you as part of our service.
My HOA has strict rules about roof colors. Can you help with approval?
We work with many HOAs in the Oregon area and can provide color samples and documentation to help with your submittal. We will make sure the metal roofing we install meets your HOA guidelines before we order materials.
Are you insured for work on my Oregon property?
Yes, we are fully insured with general liability and workers' compensation coverage. We can provide a certificate of insurance upon request so you have peace of mind.
What maintenance does a metal roof need in Oregon's climate?
Metal roofs are low maintenance, but in Oregon's snowy winters, we recommend keeping gutters clear and checking for snow buildup at the eaves. We offer inspection and maintenance services, including snow guard installation, to help your roof last. Call us to schedule a checkup.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Madison

All your work handled by qualified professionals in Madison

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Madison

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Madison · Response within 24h · No commitment · ☎ (608) 292-2031

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Madison ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm