Serving the Madison area  ·  (608) 292-2031  ·  Open Mon-Sun 7am-7pm
📞 (608) 292-2031 Free Quote

Metal Roofing in Shorewood Hills, WI (53705) · Local Professionals

Madison Metal Roofing · Fast response in Shorewood Hills and the Madison area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Shorewood Hills sits between Lake Mendota and the UW campus, a village of tree-lined streets where 1920s brick Tudors and postwar ranches share the block with newer custom homes. The lots are deep, the oaks are old, and the lake wind hits hard off the water.

Homeowners in 53705 call Madison Metal Roofing because shingle roofs here take a beating from ice dams, summer hail, and wind that funnels down the shore. We have been working these streets since 2009, and we know what fails first on a Shorewood Hills roof.

Metal Roofing in Shorewood Hills (53705)

Shorewood Hills is not a flat subdivision. The village rolls from the lakeshore up toward the university, with mature trees that drop limbs and shade roofs so they never fully dry after a snow. That shade is beautiful in July and brutal in January, because the freeze-thaw cycle at the eaves is what drives ice dams and eventually rots the fascia. Many homes here have steep pitches and complex rooflines, with dormers, valleys, and chimney flashing that need careful detailing. Tight driveways and mature landscaping mean we plan material staging before the crew arrives, not after. Homes near the lake also face wind-driven rain and occasional hail, so we spec fasteners and panel profiles for that exposure, not just for looks.

Our team has been serving Shorewood Hills and the Madison area since 2009. We are a Metal Roofing Alliance member, fully insured with general liability and workers' compensation, and our crews handle everything from stone-coated steel to copper and specialty metal.

Our services in Shorewood Hills

How a Job Works in Shorewood Hills

Step 1: You call (608) 292-2031 or request a free estimate. We schedule an on-site assessment, walk the roof and attic, check flashing and fasteners, and talk through options. You get a written scope with pricing, not a vague verbal number.

Step 2: We handle the work. If your project needs a permit, we point you to the City of Shorewood Hills website so you can confirm current requirements with the building department, since rules vary by jurisdiction. On tight lots near the lake or under mature oaks, we stage materials carefully and protect landscaping. For historic or HOA review, we help with panel profile and color selection before ordering.

Step 3: Cleanup and final walkthrough. We magnet-sweep for nails, haul away old material, and walk the finished roof with you. We leave your property clean and answer any questions before we pack up.

Pricing in Shorewood Hills depends on roof size, pitch, access, and condition. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Repairs start at $450, leak repairs at $450, and screw replacement or re-fastening at $750. Stone-coated steel and metal shingle roofing start at $9 per square foot, copper and specialty metal at $20, and coating or painting at $2.50. Snow guards and ice protection start at $1,200, and gutters for metal roofs start at $9 per linear foot. Complex rooflines, steep pitches, and tight access can raise the number, and storm damage may need temporary protection first. Call (608) 292-2031 for a free estimate.

✅ Metal Roofing Alliance Member, licensed and insured for work in Shorewood Hills and nearby areas.

My Shorewood Hills home has heavy oak shade and ice dams every winter. Will a metal roof fix that?
It can help a lot, but the fix is in the details. We look at attic insulation and ventilation, then spec the roof with proper underlayment, ice-and-water shield at the eaves, and snow guards where needed. Metal sheds snow better than shingles, and standing seam eliminates the fastener penetrations where ice dams often start. We will tell you honestly if ventilation needs work first.
A storm just peeled back panels on my roof near the lake. How fast can you respond in Shorewood Hills?
Call (608) 292-2031 and we will schedule an inspection as soon as possible, usually within a day or two for active leaks or wind damage. We can tarp or secure the area to prevent further water intrusion, document the damage for your insurance claim, and give you a repair or replacement estimate. We never promise coverage, but we do provide the documentation your adjuster needs.
What does a typical metal roof replacement cost for a 1920s home in 53705?
Most Shorewood Hills homes in that age range have complex rooflines, so expect the project to land above the base per-square-foot numbers. A straightforward replacement starts around $9 per square foot, standing seam around $10, and stone-coated steel around $9. Steep pitches, dormers, chimney flashing, and tight lot access add labor. We give you a written estimate after walking the roof, so the number is specific to your home.
Do I need a permit for a metal roof in Shorewood Hills, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof, and thresholds and inspection requirements vary. We recommend confirming current rules with the building department through the City of Shorewood Hills website before work begins. We can walk you through what our scope includes and coordinate inspection timing, but the permit requirements are set locally and must be verified with the city.
My neighbor's oak branches hang over my roofline. What are my options before I install metal?
Overhanging limbs are a real issue here because they drop debris, shade the roof, and can puncture panels in a storm. We recommend talking with your neighbor about trimming before installation, and checking your property line so the work stays on your side. If your home is in an HOA or historic review area, confirm any exterior changes with the board first. We can advise on panel profiles that meet design review requirements.
Are you insured for work on my Shorewood Hills property?
Yes. We are fully insured with general liability and workers' compensation coverage. We are happy to provide a certificate of insurance before work starts, and our crews are covered on your property. That protects you as the homeowner if anything goes wrong during the project.
What maintenance does a metal roof need in Shorewood Hills before winter?
Fall is the time to act. Clear leaves and debris from valleys and gutters, especially under the oaks, and check that snow guards are secure before the first freeze. We inspect fasteners and flashing for loosening from summer storms, and we look for any signs of ice dam damage from last winter. A free estimate inspection now is cheaper than an emergency leak repair in January.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Madison

All your work handled by qualified professionals in Madison

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Madison

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Madison · Response within 24h · No commitment · ☎ (608) 292-2031

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Madison ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm